WLZ Series
LED Lighting

Zero Uplight Wallpack

The WLZ Series features an architecturally relevant low profile LED design in lumen packages ranging from 1500 lumens to over 12,000 lumens. Its high efficiency light engine is designed for optimal light control and distribution with zero uplight. This family of product is offered in several size housings to complement any building exterior and accommodates mounting heights up to 35’. Integral emergency battery backup available for path of egress with Cold Location operation down to -20°C.
Email This Page
Your Name Recipient name
Your Email Recipient Email
The information entered on this page will not be used to send unsolicited e-mail and will not be sold to a third party.
  • Sleek die-cast aluminum housing with stainless steel hardware and powder coat black, bronze, silver or white finish
  • UV stabilized polycarbonate optical lens
  • Integral heatsink for maximized heat dissipation
  • Back box houses drivers away from LEDs and includes three ½” hubs (WLZ1 and WLZ2 - two 1/2" hubs)
  • Zero uplight design to minimize light pollution
  • 15 to 100 Watt models replace up to 400 Watt HID for up to 70% energy savings
  • Efficacies up to 123 LPW at 5000K to maximize utility rebates
  • Type III and Type IV distributions for optimal light distribution (WLZ1-Type III only)
  • Available in 3000K, 4000K and 5000K CCT
  • L70 of 50,000 hours at 40°C
  • CRI of ≥ 70
  • Class 2 power supply, 120-277VAC, 50/60Hz
  • 347/480VAC Dedicated driver option for WLZ4, WLZ7 and WLZ10
  • 0-10V Dimming driver (120-277VAC only)
  • Integral battery backup (BB) provides over 700 lumens and 90 minutes of runtime for path of egress.
  • Integral Battery Backup with Internal Heater (BB-IH) provides over 700 lumens and 90 minutes of runtime for path of egress in Cold Locations down to -20°C. Not available on WLZ1 or WLZ2
  • Power supply rated Class A EMI rating
  • Housing hinges to back box and is secured with set screws
  • Back box is complete with three ½” hubs and internal bubble level for easy installation (WLZ1 and WLZ2 - two 1/2" hubs)
  • Mounts to a standard 3-1/2” or 4” square electrical J-box
  • Suitable for downlight installation only
  • Factory installed dual driver options for WLZ4 and WLZ10 (WLZ7 is standard with 2 drivers)
  • Factory installed 120/277VAC button type photocontrol option (PC)
  • Factory installed 10kVA surge protection options (SP or SPH)
  • 120/277VAC button type universal photocontrol options accessory (PCU)
  • Dimming occupancy sensor programmable, Wattstopper FSP221 available in multiple finishes (TL-SCES-L2)
  • cULus Listed for Wet Locations
  • Operating temperatures: -40°C to 40°C (-40°F to 104°F)
  • Five year warranty (terms and conditions apply)
Sign up to receive email updates